Vehicles
Sections
229 not categorized PORSCHE 996 PARTS CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2007-11 (includes uncategorized and accessory items) FVD721ST9007 This special 5 pc. Double ended tool kit (excluding one) was designed to aid the technician in disassembly of door panels, fascia / trim strips of dashboards, window installation, etc. Made from impact resistant nylon plastic, it won't scratch or mark parts like similar metal versions. General Fitment911 GT3 2007-11911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 2005-08 BOXSTER 1997-04 911 1989-94 CAYENNE 2003-06
$24.38
Make a selection 24135199701RS Highlights: made for up to 750*c (1,382*f) for street, some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator...(choose a part on the right to read more) General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
From $382.80
Make a selection 24135299701RS Highlights: made for up to 750*c (1,382*f) for street, some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator...(choose a part on the right to read more) General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
From $196.90
Make a selection AP997240 Suspension has always been a specialty of agency power. With the current product list consisting of sway bars, control arms, sway bar links, and more, agency power has finally decided to add one more value to the Porsche suspension line up, the rear adjustable toe links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The cnc machined links are made from 6061 aluminum.they are anodized blue to match other agency power products and then laser engraved with the ap logo...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$599.95
Make a selection 190521933 Will work with recaro sport seats and 996 GT3 seats only. Does not work with OEM GT3 clubsport seats and OEM GT2 seats. Please use part # 846 r9032 & 846 r9034 for that application. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
$120.74
Make a selection 846R1030 The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$710.20
Make a selection 846R9062 Material: 11 gauge, type 304, stainless steel. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2006-08 911 1989-94 911 1970-73
$127.20
Make a selection 846R9066 Material: 11 gauge, type 304, stainless steel. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2006-08 911 1989-94 911 1970-73
$127.20
Make a selection 846R9063 Material: 11 gauge, type 304, stainless steel. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2006-08 911 1989-94 911 1970-73
$127.20
Make a selection AP996200 Racing is part of every Porsche owner's desire. Going fast is one thing, but giving your car the best handling possible is where you will excel as a driver. Agency power industries has developed these adjustable control arms for your Porsche 996 and 997 vehicle. These control arms fit on the rear of your car and help in adjusting camber and toe. In additional to being fully adjustable, these control arms offer increased rigidity from the replacement of the factory urethane bushing with spherical bearing ends. The 6061 cnc machined arms are anodized in our beautiful brilliant blue color and notched for easy adjustment. Each spherical bearing has cnc machined stainless steel fittings for a secure and safe fit. C...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$625.95
Make a selection W01 To decrease time in the pits and maximize the time on track, the GT3 cup cars came equipped with high tech center lock wheels to allow for quick wheel and tire removal during pit stops. Now you can achieve the exact look and feel with any of your factory Porsche and most aftermarket wheels. These beautifully cnc machined aluminum center caps will really set your wheels apart from the competition and give your wheels that factory cup car styling for a fraction of the cost. This very unique three piece design bolts to your wheels from the inside making them impossible to become victims of theft, compared to the unsecured factory snap on units. Supplied in your choice of silver or black anodized finishes and come ...(choose a part on the right to read more) General Fitment911 2005-08911 GT3 2007-11 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 968 1992-95 944 1989-91 944 1985-88 944 1982-85 928 1978-82 928 1983-86 924 1986-88
$295.90
Make a selection GR246370 Pentosin antifreeze is an antifreeze for passenger cars and trucks, meeting the quality requirements of the automotive manufacturers, especially suitable for alloy engines. It protects excellently against corrosion and cavitation, does not foam, prevents lime formation and is neutral to different types of metals , rubber parts and sealing materials which are used in the engine construction. Pentosin antifreeze is produced under stringent quality controls and has proved excellent operating performance in daily use. Pentosin antifreeze is free of nitrite, amine and phosphate. Lifetime antifreeze is recommended for Porsche Boxster, Cayman, Cayenne, and 911 (1998-present) models. General Fitment911 GT3 2007-11911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 CAYENNE 2003-06 CAYENNE 2007-10 944 1989-91 968 1992-95 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79
$14.50
Make a selection 10021102900 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the left side reduces the ...(choose a part on the right to read more)
$1,361.80
Make a selection 10050330000 This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$1,648.90
Make a selection 1002110221DA This is a high-quality replacement for original number, 911 211 022 10 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car.
$1,329.90
Make a selection 10010303806 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's has very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 35+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have t...(choose a part on the right to read more)
$11,932.00
Make a selection 10055511176 Quality replacement perlon / felt carpet set manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to Porsche in Germany. Features: historically correct perlon / felt material original fitment molded / form fitted includes correct cut outs and button / snap holes manufactured in europe sold as a set of 3 pieces. 1 necessary per car. Please note: the cutout for the fuse box must be cut out separately.
$137.50
Make a selection 0015400145 Ings n-spec kevlar front bumper Porsche 997 GT3 06+ General Fitment911 GT3 2007-11
$7,627.50
Make a selection 10010303204 - 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)
$9,693.51
Make a selection 150PB1027 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's 911 models from 1978-89 if fitted with an 18mm original rear sway bar.
$49.50
Make a selection 150PB100922 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 1002110211DA This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)
$1,329.90
Make a selection 100211030SSI This heat exchanger kit is engineered for the discerning Porsche 911 3.2 l owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: gains of +10-15 hp and +10-20 tq t304 stainless steel (18% cr, 8%+ ni) 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" includes o2 sensor socket connects "early style" dual inlet mufflers bolt on replac...(choose a part on the right to read more)
$2,961.20
Make a selection 10021103000 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the right side re...(choose a part on the right to read more)
$1,733.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |